Does the 9.6 V Airsoft Battery Lose Charge Fast

"This site contains chapter links to products. We may receive a commission for purchases fabricated through these links."

At that place is nothing so demoralizing every bit a bombardment failure in the midst of an airsoft battle.

Suddenly the weapon that you're relying upon becomes a dud – a useless prop in your hands. Within seconds, your game is over – and your body brindled with BBs!

This goes to underscore but how vital your battery is to your whole airsoft feel.

Getting your head around the types of batteries bachelor and how to ensure that y'all're getting the all-time out of them will brand you a much better airsofter.

The Battery Connector

The battery connector is the most important component of the whole battery story.

Unless the blazon of connector is compatible with the bombardment, you will not exist able to connect the battery and your gun volition be useless.

The most common type of battery connector that you volition come across is called the 'mini Tamiya' connector. It is the standard connector that is fitted to well-nigh airsoft rifles.

Standard Tamiya batteries are larger than the mini Tamiya. Because infinite within the battery compartment is limited, standard Tamiyas are less common.

The Dean, or T-Connector, is ofttimes institute in stock airsoft guns. This connector provides a more secure, reliable connectedness than Tamiya connectors.

As a result, experienced airsofters will often upgrade their rifles from a Tamiya to a Dean connector.

Airsoft Battery Voltage

The voltage of a battery refers to how fast the battery is able to make the motor spin.

The higher the voltage of the battery, the greater the revolutions per minute (RPM). Airsoft battery voltages range from 7.2v to 12.8v.

The nearly commonly found range, still, is between vii.two and 9.6v.

The higher the voltage of your battery, the greater the charge per unit of burn down your AEG will produce.

It will also give you lot a improve trigger response, though it will not touch on the fps (feet per second) that the BB will be able to fly.

There is a sugariness spot when it comes to airsoft battery voltage.

You want a voltage that is high enough to produce maximum performance but not too loftier to cause arcing across the trigger contacts.

In improver, if you take a voltage that is too high for the burglarize, it will put also much strain on the internal workings of the gun.

Bombardment Capacity

The capacity of an airsoft battery is measured in MilliAmp Hours (MaH).

The MaH rating of a bombardment indicates how many hours your battery will power the gun. Your airsoft rifle will not come with a MaH rating from the manufacturer.

This is something you will have to discover for yourself.

If your gun is fitted with a 1500 MaH battery and the battery lasts for iii hours, then your AEG gun has a MaH of 500 MaH.

This seems to be the standard for most AEG guns.

If you are planning on playing airsoft for a total twenty-four hour period (6+ hours), yous volition want to have one or two spare batteries in your vest.

What Kind of Batteries Does Airsoft Guns Use?

All Airsoft Automatic Electric Guns (AEGs) require a rechargeable bombardment for it to become operational.

There are five types of batteries that y'all volition come beyond:

Alkaline

Alkaline batteries are a high capacity type of battery that is bachelor in chargeable and nonchargeable options.

These batteries, however, are limited in their recharging ability. Alkaline batteries may also create bug for your rifle if they go dead.

You volition want to keep your alkaline batteries constantly charged.

Alkaline batteries are one-time school when it comes to battery engineering science. They are not as able to handle the stress associated with an airsoft weapon and so are non that popular.

NiMH Batteries

NiMH, or nickel-metal hydride, batteries evangelize a longer and more powerful charge than alkali metal batteries will provide.

However, they practise not emit as much voltage as alkaline batteries. Yet, if you allow the battery to sit idle for a long catamenia of time, it will lose charge quite speedily.

You lot will want to completely run the charge out of a NiMH battery before recharging information technology. Yous likewise should avert overcharging the bombardment.

NiMH batteries are recognized among the safest. They can exist effectively charged with a unproblematic, inexpensive charger. These are the best batteries for people who are just getting into airsoft.

NiCad Batteries

NiCad, or nickel-cadmium, batteries are popular considering they are long-lasting.

This type of bombardment is best for guns with low capacity. Like NiMH batteries, NiCads emit less voltage than alkaline batteries.

Again you will want to make sure not to overcharge the bombardment, so it's a expert idea to get a charger with an car shut off when information technology reaches full charge.

Lithium-Ion Batteries

Lithium-Ion batteries are best for high capacity airsoft rifles.

These are the most expensive batteries merely have the reward of charging within the device that they are powering.

Li-Po Batteries

Li-Po batteries are lightweight and come in a number of shapes.

They contain Lithium Polymer and are the almost unstable of all airsoft battery types. They have been known to outburst into flames if punctured or shorted.

You volition besides demand a special charger to accuse a LiPo battery. Despite these drawbacks, LiPo batteries remain popular considering they offer the greatest ability output for compact weapons.

LiPo Vs NiMH Batteries

When it comes to such gadgets as radio-controlled cars, planes and airsoft guns, nickel-metal hydroxy batteries (NiMH) accept been the go-to type for many decades.

In recent times, however, many people have switched over to Lithium Polymer (LiPo) batteries in the belief that they will produce more than bang for the buck.

So, which one should you become for?

A NiMH battery is a round cell that comes in a number of different configurations.

The AA size battery that you lot are no dubiousness familiar with is a single prison cell NiMH battery. Nickel Cadmium (NiCD) batteries look just like NiMH batteries.

Nevertheless, they accept very unlike internal features. NiCD batteries are considered to be outdated technology. Be sure to read the packaging so that you know the divergence.

A NiMH bombardment uses hydrogen to stock energy, and nickel to keep a cap on the hydrogen ions.

The bombardment cells use an element of group i electrolyte to create a positive electrode of the battery. The negative electrode consists of hydrogen ions.

LiPo batteries take 2 or more cells in a serial. It will also have a remainder pb. It is flat and rectangular, though it may vary in their width, height, and weight.

They contain carbon and lithium, which is highly reactive. They are able to restore a huge amount of free energy along with a lowered internal resistance.

Rather than the difficult metal outer shell that you find with NiMH batteries, LiPo batteries have a more malleable polymer lamination case.

To help you lot decide which battery type to put in your airsoft rifle, we volition see which performs better under a number of important battery-related criteria.

Free energy

LiPo batteries are able to hold 350 per centum more than accuse than a NiMH battery.

That means that they volition produce more power and terminal longer. Amazingly, they do this while existence much lighter than a NiMH battery.

Internal Resistance

The lower the internal resistance within the battery, the less corporeality of rut is produced, making the bombardment safer and more efficient.

LiPo batteries produce a significantly lower amount of internal resistance than NiMH batteries.

Charging a LiPo Bombardment

It is far trickier to charge a LiPo battery than any other type.

The battery pack volition have cells connected in series. You volition need a special charger that can monitor the charge on each individual cell.

It is disquisitional that no one cell ends upwardly with a greater accuse than whatsoever of the other cells. If ane cell is overcharged, some serious problems can result.

The cells of the battery will expand and delamination will occur. These things will detrimentally impact the life of the battery and outcome in potential safety bug.

Discharge Curve

The discharge curve of a LiPo battery is much lower than that of a NiMH battery. The slower the discharge curve, the less the performance quality will exist affected as the battery charge runs out.

Are NiMH batteries safer than LiPo?

Yeah, NiMH batteries are safer than LiPo batteries.

Bombardment storage is very important and when it comes to LiPo batteries, you lot are more likely to encounter problems.

LiPo batteries that are stored either flat or fully charged for more than a couple of weeks tin can cause harm to the battery, with cases having occurred where fully charged batteries have defenseless on burn down.

LiPo batteries should be near 50 per centum charged when stored. Merely if you are going to dispose of a LiPo bombardment, y'all should make sure that there is no charge left in it.

LiPo batteries are, past their very nature, less stable than NiMH batteries. This means that LiPo batteries require much greater care and maintenance than do NiMH batteries.

NiMH vs LiPo Performance

LiPo batteries take a higher capacity and voltage than NiMH batteries.

This is primarily considering they discharge energy at a flatter rate. They volition deliver a significantly college greater rate of fire for your airsoft gun.

LiPo batteries will too charge faster than NiMH batteries. The best way to charge a NiMH battery is with a trickle accuse.

Which battery is best for airsoft?

When it comes to airsoft, LiPo batteries take a lot going for them. They are lighter and more than meaty, reducing the weight of your airsoft weapon.

You practise not have to wheel a new LiPo battery and it will not lose its retentiveness cell. LiPo will final longer and requite you lot a greater rate of fire.

On the other paw, LiPo batteries are more fragile. If you driblet them when out in the field, you lot may not be able to use them.

They are more catchy when information technology comes to charging and maintenance and more probable to catch on fire. They are also more expensive than NiMH batteries.

When information technology comes to transporting your LiPo bombardment, you should always put information technology in a fireproof LiPo sack.

Battery Chargers

When it comes to charging a LiPo bombardment, you need to get a charger that is specifically designed for that purpose.

If you effort to accuse a LiPo battery on a standard bombardment charger, you will exist in for an explosion!

There are two options when it comes to LiPo chargers:

four Button Smart Charger
Balanced Charger

A Smart charger volition allow y'all to charge the bombardment to a set voltage, which is of import with a LiPo because you do non want it to be fully charged.

A balanced charger volition ensure that each of the cells is charged every bit. However, there is no facility to charge to a pre-set level. In that location is also no facility to discharge the battery.

To get in easier to accuse your LiPo battery, you should invest in a multimeter. This volition allow you to measure the level of charge in each jail cell and in the bombardment overall.

Without a multimeter, you will constantly be on the backfoot when it comes to your LiPo bombardment.

When charging your battery, make sure that yous plug the charger straight into the wall. If yous use a ability strip or an extension cord, you will non get a practiced result.

It will take much longer to charge and unless your power strip has a surge protector, you will destroy the battery if a surge does occur.

The length of time that yous charge the bombardment depends upon how many mA the battery has. Lower mA batteries will charge faster than higher ones.

Your charger will actually indicate how many mA will charge per 60 minutes. Look for numbers similar this:

OUTPUT: DC 8.4v 300mA

This tells y'all that the charger will provide 300 milliamps per hour. Yous tin can work out from this how many hours it will take to accuse the battery.

If, for case, the battery contains 1500 mA, then information technology will accept five hours (1500 divided by 300) to fully charge the battery.

If you want to know if the battery is charged and do not have a smart charger or a multimeter, you tin get a reasonable gauge of the level of charge by using the touch test.

Place a finger on the bombardment. Y'all desire the battery to be warm, but not hot enough for information technology to be fully charged. If it is hot, yous will have overcharged the battery, which will crusade damage to information technology.

Y'all should never leave a battery that is existence charged unattended.

FAQ

What specifications should I know virtually when information technology comes to airsoft batteries?

To choose the correct bombardment for your airsoft needs, you need to exist able to understand the specs on the battery packaging.

Here'southward a quick rundown:

Voltage – this refers to the power of the battery to turn the motor. Airsoft burglarize batteries generally accept a voltage between vii.2 and ix.6v. Clearly you desire it to be high to produce a greater rate of burn down and trigger responsiveness, but yous don't want it to be then loftier that it overstresses the internal workings of your rifle. Anything over 10v is probably going to exercise that.

Amperage – this is a measure of the period of electrons from the battery to the motor of your airsoft gun. The greater the amperage, the more torque your airsoft weapon will have.

Wattage – this is the total amount of power required to turn the motor pinion in the gearbox. Wattage is found by multiplying the voltage past the amperage.

Milliamp Hours – this is a measure out of the life of the bombardment. Every bit a general guide, each time y'all squeeze the trigger, you are using up i-2 milliamps.

C-Rating – this is the discharge rate of the battery.

Chemistry – this is the chemical compound of the electrolyte that travels from the anode to the cathode.

How do I know if my LiPo airsoft battery charge is getting depression?

When it comes to other battery types, information technology doesn't really affair if your battery runs expressionless.

So long every bit you've got a spare battery to supercede it with, you're good to go. When it comes to LiPo, however, you DO Non want to let the battery run dry out.

If y'all do, the battery will be permanently damaged to the betoken of beingness unusable. Instead, you lot need to keep a minimum of about 30 percent charge in the battery.

Knowing when your LiPo battery is low is a skill that you will develop over time. Hither are some pointers to aid you:

The rate of fire of your airsoft gun will slow downwards. As soon equally you notice this, you should pause to supercede the battery. Ignoring this sign because you are caught upwards in the heat of the battle could exist a plush error!
Purchase a battery tester and plug it in to permit you know what level of charge you lot accept left on the bombardment.
Invest in a low battery alarm. This is a small device that plugs into the balancing socket of your battery. It will emit an alarm when the battery gets down to 3 volts.
Apply a low voltage cutting-off device. It will cut the power to the trigger when the battery level hits a critical level.

How can I best maintain my LiPo battery?

The well-nigh critical thing to know, which we have already noted in this article, is that you must not store your LiPo battery in either an empty or a fully charged state.

The ideal storage voltage appears to exist 3.8 volts. You should never let the voltage of your LiPo battery to drib beneath iii.0 volts.

LiPo batteries should exist stored within of a LiPo sack.

This is a small bag that is fireproof and seals completely. This affords protection if the chemicals leak from the bombardment and if the bombardment catches on fire.

Fifty-fifty though in that location is a possibility that LiPo batteries may catch on fire, the reality is that the chances of this happening are very low.

Still, you demand to do everything to prevent a disaster from occurring. This includes putting the bombardment in a fireproof sack and situating information technology in an surface area that is away from other flammable materials.

How should I dispose of a LiPo battery?

When it comes time to dispose of your LiPo battery, you lot must NEVER put it out with the garbage or throw it in the trash. You should only take your used LiPo batteries to a recycling center.

Practice airsoft batteries lose charge?

Yep, every bit with all batteries, airsoft batteries volition lose accuse. The charge per unit at which information technology will do so will depend on the type of battery.

The well-nigh of import number to await at on the battery is the mAH. One BB ordinarily equates to one mAH. And then, a bombardment that has g mAH will let you to burn down 1000 Bulletin board system.

From the higher up, we can meet that it is impossible to requite a timeframe as to losing charge. It all depends on your rate of burn.

If you let off a 1000 rounds in an 60 minutes, then your battery will be exhausted within that time frame.

Only, if you go all twenty-four hour period and only shoot 250 rounds, then you'll take plenty of charges left on the way habitation.

Decision

Your bombardment is at the heart of your entire airsoft take a chance.

Be certain to follow the advice we've provided in this article to ensure that you purchase the best batteries for your airsoft weapon, charge them for best performance and maintain them in order to accomplish maximum usage.

Practice those things and you lot will experience a less frustrating, more rewarding airsoft feel.